- This topic has 2 replies, 3 voices, and was last updated 3 years, 2 months ago by
.
-
Posts
-
Hi All, Thank you for your help before. Here is another question which I am not so sure about. There is a small gap between the deck and the boat at the bow. (see below). Do I just add a bunch wood fiber epoxy in the space while gluing it together? Or do I add a line epoxy down the center line of the boat?
Thanks again for everyone help,
Andy
Andy, there should not be a gap between the nose block and the deck. I don’t have the build manual handy right now and it is difficult to tell from this photo what the problem is. The king plank should rest on the center frame and end at the nose block. It is not clear, but you might have trimmed down the nose block too far along with the toe railings. There should not be a gap between the deck and toe railings. Could you post more pictures?
I agree. It looks like you need to trim back the “king plank” so it drops behind the nose block, although it’s not totally clear from the picture you posted. This assumes that the deck in the picture is properly aligned front-to-back.
Epoxy in some wood pieces where the screws for the handle will enter to ensure that it’s strong enough. I added a 3/4 x 3/4 scrap to each side of the center frame but bigger than that might be better.
- You must be logged in to reply to this topic.