Forum Replies Created
-
AuthorPosts
-
Andy Stinson
ParticipantHi Rick, Thank you for the offer. but I ended up with a trailer just like that for about the same price but the one I got came with the sailboat which I just sold
Andy Stinson
ParticipantI am getting closer to having my boat built Does any have pictures on how the steering hookup to the 6hp tohatsu?
Andy Stinson
ParticipantHi All, I have a question about mounting the steering wheel hub to the boat. I got one from Brown tools and would like to know the size of the bolts needed to attached it. Thanks, Andy
Andy Stinson
Participant<p style=”text-align: left;”>Hi Bill</p>
that sounds good I am in DurhamAndy
Andy Stinson
ParticipantThank you for the pictures
Andy
July 15, 2021 at 12:13 pm in reply to: A few questions about backing, motor wedges, & Aluminum back plating #13080Andy Stinson
ParticipantHey Marty, Thank you for the offer. However, I already have a pervious engagement for that weekend. But if not, I would have taken you up on offer.
Andy
July 14, 2021 at 12:16 pm in reply to: A few questions about backing, motor wedges, & Aluminum back plating #13065Andy Stinson
ParticipantI agree with Marty on making the wedge. Also thank you everyone so far for their input on my questions.. I look forward to being on the water soon (I hope)
Andy
July 12, 2021 at 12:55 pm in reply to: A few questions about backing, motor wedges, & Aluminum back plating #13059Andy Stinson
ParticipantHey Marty, thank you word of advice. I have not put the lid on the boat yet (next step). I will add backer board to bow area for the handle. One question, how long is the wedge you made?
Thanks again for help,
Andy
Andy Stinson
ParticipantHey Marty, Thank you for the update. I am very interested in Brown thrust bracket and the wedge. I would like to see how it was modify to work because I have one as well. I would like to come see your boat but I live in North Carolina.
Andy
June 28, 2021 at 7:21 pm in reply to: A few questions about backing, motor wedges, & Aluminum back plating #13055Andy Stinson
ParticipantHere is a picture of the boat so far
Andy Stinson
ParticipantHey Marty, Thank you for the update However, I do not think that I will be able to make it to that race 🙁 but would like to see pictures of improved thrust bracket.
Thanks again,
Andy
Andy Stinson
ParticipantHi Marty and All,
what were you able to find out for the Tohatsu’s thrust bracket placement? I am getting my 6hp Tohatsu soon and was trying to figure out what I need to do for this.
Thanks,
Andy
Andy Stinson
ParticipantThanks all. it is a Ultraflex which I have. (sorry for the fat fingering and bad spelling).
Andy Stinson
ParticipantHi, I have two question for everyone
- Where would be the best place to install inspection ports on the side lockers?
- What size would work the best?
Thanks,
Andy
Andy Stinson
ParticipantHi Marty, I contacted CLC and they cut a new part and sent it to me
Andy
-
AuthorPosts